Remote Control
R&S
®
FSVA/FSV
738Operating Manual 1176.7510.02 ─ 09
Parameters:
<Probability> P0_01: Level value for 0.01 % probability
P0_1: Level value for 0.1 % probability
P1: Level value for 1 % probability
P10: Level value for 10 % probability
Example:
CALC:STAT:CCDF:X1? P10
Returns the level values that are over 10 % above the mean
value.
Manual operation: See "CCDF" on page 395
CALCulate<n>:STATistics:NSAMples
<NoMeasPoints>
This command sets the number of measurement points to be acquired for the statisti-
cal measurement functions.
Suffix:
<n>
.
irrelevant
Parameters:
<NoMeasPoints> 100 to 1E9
*RST: 100000
Example:
CALC:STAT:NSAM 500
Sets the number of measurement points to be acquired to 500.
Manual operation: See "# of Samples" on page 391
CALCulate<n>:STATistics:PRESet
This command resets the scaling of the X and Y axes in a statistical measurement.
The following values are set:
x-axis ref level: -20 dBm
x-axis range APD: 100 dB
x-axis range CCDF: 20 dB
y-axis upper limit: 1.0
y-axis lower limit: 1E-6
Suffix:
<n>
.
irrelevant
Example:
CALC:STAT:PRES
Resets the scaling for statistical functions
Manual operation: See "Default Settings" on page 393
Remote Control – Commands
To Next Page
Loading...
