Rohde & Schwarz FSVA - Page 666

Remote Control
R&S
®
FSVA/FSV
666Operating Manual 1176.7510.02 ─ 09
CALCulate<n>:MARKer<m>:COUNt:RESolution <Resolution>
This command specifies the resolution of the frequency counter (marker 1).
Suffix:
<n>
.
Selects the measurement window.
<m> irrelevant
Parameters:
<Resolution> 0.001 | 0.01 | 0.1 | 1 | 10 | 100 | 1000 | 10000 Hz
*RST: 0.1 Hz
Example:
CALC:MARK:COUN:RES 1kHz
Sets the resolution of the frequency counter to 1 kHz.
CALCulate<n>:MARKer<m>:LINK <DisplayType>
Links the markers in all displays of the specified type.
Suffix:
<n>
.
1...4
window
<m> 1...16
marker
Parameters:
<DisplayType> TIME | SPECtrum | BOTH | NONE
TIME
Links the markers in all time domain diagrams
SPECtrum
Links the markers in all AF Spectrum displays
BOTH
Links the markers both in the time domain diagrams and in the
AF Spectrum displays
NONE
Markers are not linked.
*RST: NONE
Example:
CALC1:MARK1:LINK TIME
Links the marker 1 in all time domain diagrams in screen A.
Mode: ADEMOD
CALCulate<n>:MARKer<m>:LOEXclude <State>
This command turns the local oscillator suppression during a peak search on or off.
Suffix:
<n>
.
Selects the measurement window.
<m> irrelevant
Remote Control – Commands