Instrument Function
R&S
®
SMBV100A
185Operating Manual 1407.6062.32 ─ 08
Import/Export >>>
Expands the menu with the area for import and export of user correction files.
Externally edited Excel tables with any number of frequency/level value pairs can be
imported as text or CSV-files and used for user correction.
Conversely, you can also export internally created user correction lists as text or CSV-
files.
Mode - User Correction
Selects if user correction lists should be imported or exported. The settings offered
depend on the selected mode.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 621
Extension - User Correction
Selects the file extension of the ASCII file to be imported or exported. Selection "TXT"
(text file) or "CSV" (Excel file) is available.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 619
Decimal Point - User Correction
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 621
Column Separator- User Correction
Selects the separator between the frequency and level column of the ASCII table the user
correction list is exported to or imported from.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 620
RF Signal and Analog Modulations - RF Block
To Next Page
Loading...
