Instrument Function
R&S
®
SMBV100A
206Operating Manual 1407.6062.32 ─ 08
Parameter Value
Double Pulse Width 100 ns
Double Pulse Delay 200 ns
Pulse Period, Pulse Delay -
Chan-
nel 1
= Indicates the external trigger signal which is input at the PULSE EXT connec-
tor. The negative slope is active. A second trigger signal during double pulse
generation is without effect.
Chan-
nel 2
= Indicates the sync signal. The sync signal starts after a trigger delay of typically
50 ns (see specifications). The sync signal is output at the PULSE SYNC con-
nector.
Chan-
nel 3
= Indicates the double pulse signal. The first pulse starts without a delay. The
second pulse starts after the set double pulse delay (time between start of first
pulse to start of second pulse). The double pulse is output at the PULSE
VIDEO connector.
RF Signal and Analog Modulations - RF Block
To Next Page
Loading...
