14
SEL-2032 Communications Processor Instruction Manual Date Code 20120126
Settings Sheets
SEL-2701, SET P, and SET A
Date: ________________________________
Approved by: _________________________
SEL-2032 S/N: _______________________
DNPUP02 UDP Response Port Number for Master 2 (1–65534, REQ) ____________________
UNSL02 Enable Unsolicited Reporting for Master 2 (Y,N) ____________________
PUNSL02 Enable Unsolicited Reporting at Power up for Master 2 (Y,N) ____________________
DNPMP02 CUSTOM Mode: DNP3 map associated with Master 2 (1–5) ____________________
DNPCL02 Enable Controls for Master 2 (Y,N) ____________________
RPADR03 DNP3 Address for Master 3 (0–65519) ____________________
DNPIP03 IP Address for Master 3 (www.xxx.yyy.zzz) ____________________
DNPTR03 Transport Protocol for Master 3 (UDP, TCP) ____________________
DNPUP03 UDP Response Port Number for Master 3 (1–65534, REQ) ____________________
UNSL03 Enable Unsolicited Reporting for Master 3 (Y,N) ____________________
PUNSL03 Enable Unsolicited Reporting at Power up for Master 3 (Y,N) ____________________
DNPMP03 CUSTOM Mode: DNP3 map associated with Master 3 (1–5) ____________________
DNPCL03 Enable Controls for Master 3 (Y,N) ____________________
RPADR04 DNP3 Address for Master 4 (0–65519) ____________________
DNPIP04 IP Address for Master 4 (www.xxx.yyy.zzz) ____________________
DNPTR04 Transport Protocol for Master 4 (UDP, TCP) ____________________
DNPUP04 UDP Response Port Number for Master 4 (1–65534, REQ) ____________________
UNSL04 Enable Unsolicited Reporting for Master 4 (Y,N) ____________________
PUNSL04 Enable Unsolicited Reporting at Power up for Master 4 (Y,N) ____________________
DNPMP04 CUSTOM Mode: DNP3 map associated with Master 4 (1–5) ____________________
DNPCL04 Enable Controls for Master 4 (Y,N) ____________________
RPADR05 DNP3 Address for Master 5 (0–65519) ____________________
DNPIP05 IP Address for Master 5 (www.xxx.yyy.zzz) ____________________
DNPTR05 Transport Protocol for Master 5 (UDP, TCP) ____________________
DNPUP05 UDP Response Port Number for Master 5 (1–65534, REQ) ____________________
UNSL05 Enable Unsolicited Reporting for Master 5 (Y,N) ____________________
PUNSL05 Enable Unsolicited Reporting at Power up for Master 5 (Y,N) ____________________
DNPMP05 CUSTOM Mode: DNP3 map associated with Master 5 (1–5) ____________________
DNPCL05 Enable Controls for Master 5 (Y,N) ____________________
RPADR06 DNP3 Address for Master 6 (0–65519) ____________________
DNPIP06 IP Address for Master 6 (www.xxx.yyy.zzz) ____________________
DNPTR06 Transport Protocol for Master 6 (UDP, TCP) ____________________
DNPUP06 UDP Response Port Number for Master 6 (1–65534, REQ) ____________________
UNSL06 Enable Unsolicited Reporting for Master 6 (Y,N) ____________________
PUNSL06 Enable Unsolicited Reporting at Power up for Master 6 (Y,N) ____________________
DNPCL06 Enable Controls for Master 4 (Y,N) ____________________
RPADR07 DNP3 Address for Master 7 (0–65519) ____________________
DNPIP07 IP Address for Master 7 (www.xxx.yyy.zzz) ____________________
DNPTR07 Transport Protocol for Master 7 (UDP, TCP) ____________________
DNPUP07 UDP Response Port Number for Master 7 (1–65534, REQ) ____________________
UNSL07 Enable Unsolicited Reporting for Master 7 (Y,N) ____________________
Port ( 17 / 18 )
Courtesy of NationalSwitchgear.com
To Next Page
Loading...