SCM CU 300C - 3.1 Speed Change

EN
9a - OPERATIONS AND ADJUSTMENTS OF SPINDLE
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN Cap. 9a Pag. 7/45
9A.3.1 SPEED CHANGE
(cu_9a-3-1_0.0)
The spindle speeds are (50 Hz): 3.500 - 7.000 - 10.000 rpm - (60 Hz): 4.200 - 8.400 - 12.000 rpm.
Positions and relative speed are given on the plate (B fig. 9.3-1).
To select the speed move the motor belt into the proper race corresponding to the speed desired, proceeding as
follows.
Fig. 9.3-1
DANGER-WARNING:
(U.S.A. and CANADA version): with selector (E fig. 9.3-1) turned to (
) the machine is under safe
condition.
Before starting the machine make sure that the rotation speed you have selected is proper for the
working, the wood type and for the tool used on the machine.