10 - USE AND ADJUSTMENT OF PLANER SPINDLE GUARD AND SAFE WORKING
EN
Pag. 14/20 - Cap. 10 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
10.3.1.6 STRAIGHTENING SHORT PIECES
(fs_10-3-1-6_0.0)
and bridge-type protection
NOTE-INFORMATION:
adjust the bridge guard as described in the previous sections.
- Move the piece along the fence and towards the outlet table by keeping the left hand with clenched fist, then
with the right hand push the piece by using a pusher.
Fig. 10.3-1-6
To Next Page
Loading...
