20 - MAINTENANCE
EN
Pag. 14/44 - Cap. 20 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
20.3 LUBRICATION
(ev_20-3_0.0)
The accurate lubrication ensures the long life as well as the best performance of the machine.
SAW - MOULDER
Weekly lubricate with grease:
Manufacturer Lubricant name
AGIP GR MU EP1
ARAL ARALUB HL1
BP GREASE LTX1
SHELL SUPER GREASE EP1
MOBIL MOBILPLEX 46
KLÜBER CENTOPLEX 1
ESSO BEACON EP0
1) worms (A fig. 20.3) for height adjusting and tilting of the saw blade.
2) Moulder spindle lifting screw (V fig. 20.3).
3) The elements of scorer unit (C fig. 20.3).
DANGER-WARNING:
do not oil, do not grease:
- the guides of sliding table (S fig. 20.1B) and of rail (B fig. 20.1B) .
NOTE-INFORMATION:
- as all bearings are sealed and lubrificated-for life, they do not require any maintenance;
- when you have to replace these bearings directly apply to SCM spare parts department;
- bearings of other makes, with corresponding names, are NOT suitable.
NOTE-INFORMATION:
protect all belts and pulleys to avoid contamination with oil.
To Next Page
Loading...
