3 - TECHNICAL SPECIFICATIONS
EN
Pag. 18/22 - Cap. 3 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
3.5.1 DUST EMISSION
(mmax_3-5-1_0.0)
DUST EMISSION
Operating conditions – Cutting, Surfacing, Thicknessing, Drilling, Moulder machining
Reference regulations: BG-GS-HO- 05
Dust emitted [mg/m
3
]
Operator’s site
< 2
DANGER-WARNING:
HARDWOOD SAWDUSTS ARE HARMFUL TO YOUR HEALTH
FORBIDDEN:
DO NOT USE COMPRESSED AIR.
DANGER-WARNING:
it is necessary to connect all suction hoods to the suction system.
Before starting the working make sure that the suction system is switched on.
To Next Page
Loading...
