1 - GENERAL INFORMATION
EN
Pag. 10/24 - Cap. 1 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
1.6 SYMBOLS ON THE MACHINE
(gc-1-6_0.0_ce)
CAUTION:
the operator must pay attention to the signs and plates fixed on the machine.
Danger due to electric power
- B -
It cuts electrical power supply to the machine - D -
Use gloves for handling the tools
Read the manual and follow the
manufacturer's instructions
- E -
Blade dimensions plate - F -
Blade dimensions plate: DADO SET
- F -
Technical specifications plate
- G -
Indicates the point where the hooks shall be
applied for machine raising
- L -
Locking symbol - M -
Warning plate: DADO SET - N -
To Next Page
Loading...
