EN
20 - MAINTENANCE
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN Cap. 20 Pag. 3/44
20.1 MACHINE CLEANING
(ev_20-1_0.0)
DANGER-WARNING:
all cleaning operations are to be carried out by the machine operator or by skilled technician.
DANGER-WARNING:
before carrying out any of the operations make sure to cut the main electric power and disconnect
socket (T fig. 20.1) from plug (S fig. 20.1).
U.S.A. and CANADA version:before carrying out maintenance operations, adjustments or to
dismount any machine member turn main switch (Y fig. 20.1) to 0, lock it then indicate this with a
sign.
DANGER-WARNING
to handle the knives and the cutterblock you shall wear safety gloves.
FORBIDDEN:
DO NOT USE COMPRESSED AIR; by blowing with a strong air jet (fig. 20.1) chips,dust and dirt of
any type may enter into the moving members, so the machine is no more efficient.
Fig. 20.1
The general cleaning ensures the long life of the machine and is an important safety factor.
NOTE-INFORMATION:
the frequency of cleaning interventions is determined by the room in which the machine is
installed and by the machined material.
To Next Page
Loading...
