1 - GENERAL INFORMATION
EN
Pag. 16/24 - Cap. 1 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
1.8 CONDITIONS FORESEEN FOR THE USE
(ev_1-8_0.0)
This machine has been designed for cutting, squaring, milling, tenoning, drilling and thicknessing solid wood, ber
boards, chipboard panels, ply-wood and laminboard, coated and non-coated.
DANGER-WARNING:
materials different from those quoted above, since dissimilar to wood, are thus prohibited: the user
is solely responsible for any damage caused by machining such materials.
DANGER-WARNING:
the fitting of circular blades on the spindle is not permitted.
It is forbidden to insert shims between the spacer rings to willingly unbalance the tools.
DANGER-WARNING:
the material to be processed must not contain metal parts.
DANGER-WARNING:
use tools that are suitable for the material you want to work with.
To Next Page
Loading...
