SCM CU 300C - Saw Guide Assembly with Micrometric Adjustment

EN
4 - INSTALLATION
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN Cap. 4 Pag. 21/53
4.3.33.1 SAW GUIDE ASSEMBLY WITH MICROMETRIC
ADJUSTMENT
(mmax_4.3.33.1_0.0)
- Position the support (C fig. 4.3-33-1) on the slider (B fig.4.3-33-1) and tighten lever (D fig.4.3-33-1).
Fig. 4.3-33-1