Siemens HiPath 3000 Series - Page 1231

Product Specific Attributes
HiPath 5000 V7
Issue: 18
th
April 2007 Page - 9 -
Siemens Enterprise Communications GmbH & Co KG
Application Function Type A-Prot.
M-
Prot.
T-
Prot.
D-
Ports
A-Ports Remarks
Cornet TC (HG1500)
Cornet TC
server Cornet-TC --- TCP 4060
1 -
65535
Def: CorNet-TC
Adm: Default can be
modified within this range
H.323 Call Signaling
(HG1500) active VoIP
Verbindungssteuerung
client H.323 (H.225-Q.931) --- TCP
12250 -
12950
1 -
65535
Def: H.323
Adm: Default can be
modified within this range
H.323 Call Signaling
(MDW_MSA) Voice
over IP:
Verbindungssteuerung
server H.323 (H.225-Q.931) --- TCP 1720 Def: H.225/Q.931
H.323 Media Signaling
(MDW_MSA) Voice
over IP:
Verbindungssteuerung
f?r Sprachkan?le
(Mediachannels)
server H.323 (H.245) --- TCP
12000 -
12100
Def: H.245 portnumber is
negotiated via H.225
RTP Payload
Transport (HG1500)
active VoIP
Payloadtransport
client RTP_RTCP --- UDP
29100 -
29159
1 -
65535
Def: RTP portnumber is
negotiated via H.245.
Max 30 connections: RTP
starts at <adr>, RTCP at
<adr>+1 (=RTP+1).
Adm: Default can be
modified within this range
RTP Payload
Transport (HG1500)
passive VoIP
payloadtransport
server RTP_RTCP --- UDP
29100 -
29159
1 -
65535
Def: RTP portnumber is
negotiated via H.245.
Max 30 connections: RTP
starts at <adr>, RTCP at
<adr>+1 (=RTP+1).
Adm: Default can be
modified within this range
HLM Connectivity (client sided) client sided HiPath Licence Management
.
CLA Connectivity (CLC)
Used for data transfer
between CLC / CLM
client HLP ---
TCP -
SSL
61740
Def: Port will be discovered by CLM
through multicast procedure. CLC
uses port by configuration.
LDAP Connectivity (client sided) client sided connectivity to a LDAP Service
.
LDAP Access Directory
access via LDAP
client LDAP --- TCP
1024 -
65535
Def: Ephemeral Ports (IANA)