inst_h3.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
4-131
Nur für den internen Gebrauch Installing HiPath 3000
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
a) Slide in the backplane.
b) Check if the backplane is properly positioned (see image above).
c) Fix the backplane by pressing the springs back into the original position.
9. Install the motherboard in the system and the backplane.
10. Install the UPSC-DR power supply .
11. Attach the cover of the system.
12. Insert the expansion cards and optional modules in the HiPath system.
13. Mount the HiPath system back into the rack.
14. Attach the cable connectors again onto the motherboard, expansion cards and the optional
modules.
15. Reconnect the power cord and start the system.
To Next Page
Loading...
