EasyManua.ls Logo

Siemens SINAMICS Series - Page 298

Siemens SINAMICS Series
350 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cabinet Configuration and EMC Booksize
7.4 Arrangement of components and devices
Equipment Manuel for Booksize Power Modules
7-16 Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2
Arrangement of the VCM:
Power section up to 36 kW: Preferably on the right next to the power section
Power section from 55 kW: Preferably on the left next to the power section
In a retrofit: At the end of the module group
Note regarding the use of modules with a width of 50 mm
Danger
If a Motor Module with a width of 50 mm or a DC link component is located on the left-hand
side of the drive line-up, the bridges there must be removed.
If not, this could result in damage or accidents.
Figure 7-4 Removing the DC link bridges (two-tier arrangement)
The DC link bridges must be removed by unscrewing the M4 screws.

Table of Contents

Other manuals for Siemens SINAMICS Series

Related product manuals