Simrad EK80 - Defining the IP Address on the Processor Unit Network Adapter for Communication with the Wide Band Transceiver (WBT)

394149/C
161
6OntheleftsideoftheInstallationdialogbox,clickSoftwareLicense.
ObservethattheSoftwareLicensepageopens.
7ClickTypeLicenseString,andtypethelicensestringintothedialogbox.
IfyoudonothaveacomputerkeyboardconnectedtoyourEK80system,clickthe
Keyboardbuttontoopenanon-screenkeyboard.
Tip
Ifyouhavereceivedthelicensestringonanelectronicformat(e-mailortextle),
youcancopythestringfromthesourcedocumentandpasteitintotheTypeLicense
Stringdialogbox.
8ClickOKtosavethelicensestringandclosetheTypeLicenseStringdialogbox.
9VerifythatthelicensestringisplacedintheCurrentlyactivelicenseslist.
Ifnecessary,clickthearrowbutton[>]tomoveitfromthelistofinactivelicensestring.
10ClickApplyandthenClosetosavealltheparametersandclosetheInstallationdialog
box.
DeningtheIPaddressontheProcessorUnitnetworkadapter
forcommunicationwiththeWideBandTransceiver(WBT).
ThecommunicationbetweentheProcessorUnitandthetransceiver(s)ismadeusingahigh
speedEthernetcable.Ifmorethanonetransceiverisused,anEthernetswitchisadded.In
ordertocommunicate,yourecommendthatdenewhichIPAddressandSubnetmaskthe
EthernetadapterintheProcessorUnitshalluseforthiscommunication.
Prerequisites
ThisprocedureismadefortheMicrosoft
®
Windows
®
7operatingsystem.Itisassumedthat
youarefamiliarwiththisoperatingsystem.
Context
AslongasyoudonotchangetheProcessorUnittoanothercomputer,orreplacethenetwork
adapterinyourProcessorUnit,youwillonlyneedtodothisonce.
Procedure
1OntheProcessorUnit,stoptheEK80program.
2OpentheNetworkandSharingCenterdialogbox.
aInthebottomleftcorner,clickStart.
Settingtowork