Simrad EK80 - Testing the Interfaces to External Devices

194
394149/C
Testingtheinterfacestoexternaldevices
Inordertoprovidetherelevantnavigationaldata,theEK80mustbeconnectedtoexternal
sensors.
Prerequisites
ThisprocedureassumesthattheEK80systemhasbeeninstalledasspeciedintheEK80
Installationmanual.
ItisalsoassumedthattheEK80isconnectedtooneormoreexternalsensorstoprovide
navigationalinformation,andthatthesesensorsareoperational.
Nospecictoolsorinstrumentsarerequiredforthistest.
Context
Thisprocedureshallverifythattheinterfacestoexternalsensorsareoperational.
Allrelevantproceduresforsettinguptheinterfacestoexternaldevicescanbefoundin
theEK80InstallationmanualandintheEK80Referencemanual.Theproceduresare
alsoavailableintheon-linehelp.
Procedure
1SettheEK80tooperateinnormaloperation.
2Verifythattherelevantexternaldevicesareoperational,andthattheytransmitdata.
3VerifythattheEK80receivesthedata.
aOpentheSetupmenu.
bClickInstallation→I/OSetup.
cUsethePortMonitordialogboxtoverifythatsensordataisreceivedasexpected.
SimradEK80