Simrad EK80 - Reading the Transceiver Hardware and Software Versions

394149/C
195
Readingthetransceiverhardwareandsoftwareversions
TheTransceiverInstallationpageintheEK80userinterfaceshowsyouallrelevant
informationrelatedtothehardwareandsoftwareversionsintheWideBandTransceiver
(WBT).Thisinformationmustberegisteredforfuturereference.
Prerequisites
TheEK80mustbeswitchedonandinnormaloperationalmode.Allrelevantchannels
(transceiver/transducercombination)areinstalled.
Context
ThehardwareandsoftwareversionsinusebyeachWideBandTransceiver(WBT)are
requiredforauniqueidenticationoftheEK80systematthetimeofthetest.
Procedure
1ClicktheSetupicon.
TheiconislocatedundertheMainmenu.ItisusedtoopentheSetupmenu.
2ClicktheInstallationbutton.
aObservethattheInstallationdialogboxopens.
bOntheleftside,clickTransceiver.
cObservethattheTransceiverpageopens.
3Checkthatallapplicabletransceiversandtransducersareconnectedandoperational.
Foreachtransceiver,thisisindicatedbythegreenlabelwithtext"Installed".
4RepeatthiscycleforeachWideBandTransceiver(WBT)inuse.
aClickonthetransceivertoselectit.
bInthetransceiverlist,readthenameofthetransducerinuse.
cIntheTransceiverInformationeld,readthefollowinginformation:
•Identity
•FPGATXFirmwareversion
•FPGARXFirmwareversion
•SWVersion
dWritedownthisinformationinthetableprovided.
5ClosetheInstallationdialogbox.
Settingtowork