Simrad EK80 Installation Manual

394149/C
165
3OntheSetupmenu,clickInstallation.
ObservethattheInstallationdialogboxopens.Thisdialogboxcontainsanumberof
pagesselectedbythemenuontheleftside.
4Installthefrequencychannels(s).
aObservethatthetransceiver(s)youhaveconnectedtotheProcessorUnitare
shownatthetopofthepage.
Eachtransceiverisidentiedwithtypeanserialnumber.Theavailablechannels
oneachtransceiverarelistedseparately.
Ifnotransceiversarelisted,clickBrowseintheTransceiverBrowsingeld,and
opentheLocalIPAddresseldtoselectthecorrectaddressfortheEthernet
adapteryouareusing.ThiswillmaketheEK80searchthenetworkforavailable
transceivers.Ifyoustillhavenotransceiverslisted,checkthateachtransceiver
hasbeenpoweredup,andthattheEthernetcommunicationbetweentheunitsis
operational.Also,ifyouareusinganEthernetswitch,verifythatitworks.
bForeachchannel,usethedrop-downlisttochoosetransducer.
Thelistoftransducersavailableforinstallationisdenedbythoseyouinstalled
ontheTransducerpage.
Note
Thisisacriticaltask.Youmustensurethatthecorrecttransducerisselected.
cObservethatthestatusfortherelevantfrequencychannelschangestoInstalled.
5ClickOKtosavethechosensettingsandclosethedialogbox.
Result
Whenalltransceiverchannelshavebeeninstalled,youcangototheOperationmenuand
setOperationtoNormal.
Caution
YoumustneversettheEK80intonormaloperationwhentheshipisindrydock.The
transducerwillbedamagedifittransmitsinopenair.
Settingtowork

Simrad EK80 Specifications

General

Brand	Simrad
Model	EK80
Category	Marine Equipment
Language	English