Simrad EK80 - Page 181

394149/C
179
bClickonceontheportyouwishtouse(serialorLAN).
cClicktheInputbuttonbelowthelisttoopentheSelectInputsdialogbox.
6OntheAvailableInputslist,clickthesystem/datatype(s)youwishtoimport,then
click[►].
Toimportannotationsfromaperipheralsystem,chooseAnnotations.
7Verifythatthechosendatatype(s)areshownintheInputslist.
8ClickOKtosavethechosenparametersandclosetheSelectInputsdialogbox.
9OntheI/OSetuppage,clickonceonthechosencommunicationporttoselectit.
10Ifyouareusingaserialport,denetherelevantcommunicationparameters.
aClickSetuptoopentheSerialPortSetupdialogbox.
bIntheSerialPortSetupdialogbox,denetherelevantparametersforthe
communication.
ThecommunicationparametersdenedforNMEA0183are:
•Baudrate:4800bitspersecond
•Databits:8
•Parity:None
•Stopbits:One
Someinstrumentsmayofferotherparametersand/orchoices.Youmustalways
checktherelevantdocumentationprovidedbythemanufacturer.
cClickOKtosavethechosenparametersandclosetheSerialPortSetupdialogbox.
11IfyouareusinganEthernetcommunicationport(LAN),denetherelevant
communicationparameters.
aClickSetuptoopentheLANPortSetupdialogbox.
bIntheLANPortSetupdialogbox,denetherelevantparametersforthe
communication.
Theparametersmustbesetuptomatchyournetworkenvironment.
•LocalIPAddress:ThisistheInternetProtocol(IP)addressofthelocalEthernet
interfaceadapter(circuitboard)inyourProcessorUnit.Ifyouhaveonlyone
Ethernetadapter,youmustusethedefaultvalueprovided.Ifyouhavemore
thanoneEthernetadapteronyourcomputer,orifyouuseanadapterwith
multipleIPaddresses,youmustspecifytheIPaddressoftheadapteryou
wishtouse.
•LocalPort:Thisportmustmatchtheportnumberontheremotecomputer.To
ndtheportnumberontheremotecomputer,consultthedocumentationforthe
Settingtowork