64 57 498 D3543
316 D3543.201.01.05.02 08.2016
10Overview of all function keys Sirona Dental Systems GmbH
10.7Setup program Operating Instructions INTEGO
If this function is switched off, the display switches between a still or live
image when the foot pedal is pressed. The knob on the camera is used
to focus the image.
If the function is switched on, the camera image is focused when the foot
pedal is actuated. The display only switches between a still or live image
when the foot pedal is pressed down fully. The knob on the camera can
still be used to focus the image.
White screen
If the treatment center does not have an x-ray viewer but is equipped with
a SIVISION monitor, this can be switched to a white screen.
Cleaning agent mixture for chemical suction hose cleaning
The suction system can be automatically cleaned by pumping water into
a tank behind the receptacle of the suction hoses and extracting it from
there. A cleaning agent is automatically added to the water if the dental
treatment center is equipped with the chemical suction hose cleaning
option. It is possible to set how much cleaning agent should be mixed with
water for chemical suction hose cleaning.
Water heater
The optional heater for the treatment water can be switched on/off.
10.7.3 Network connection
Configuring IP address setup dialog
Opens the
IP Address
setup dialog.
Entry of the IP Address, subnet mask and the Gateways
To configure a static network connection
DHCP
Activates the dynamic network configuration with DHCP (Dynamic Host
Configuration Protocol)
Name in the network
To enter the device name of this treatment center in the network.
10.7.4 Service domain
Opening the service function
The Service domain is intended to be used only by service engineers.
Please contact your service technician or your dental depot.
To Next Page
Loading...
