Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
Crankshaft feeler gauge
(P/N 420 876 620)
APPLICATION
377 and 443 engines.
Crankshaft distance gauge (5.7
mm)
(P/N 420 876 822)
APPLICATION
377 and 443 engines.
N–>
Camshaft locking tool
(P/N 529 035 839)
APPLICATION
1004 and 1503 engines.
Valve spring compressor cup
a) (P/N 529 035 764)
N–>
b) (P/N 529 035 725)
APPLICATION
A) 1004 engines.
B) 1503 engines.
Ring compressor
Not sold by BOMBARDIER.
Snap-On RC980
APPLICATION
1004 and 1503 engines.
Special pliers for valve stem seal
removal
Not sold by BOMBARDIER.
Snap-On YA 8230
APPLICATION
1004 and 1503 engines.
Valve stem seal installer
(P/N 529 035 687)
APPLICATION
1004 and 1503 engines.
Oil VAC
(P/N 529 035 880)
APPLICATION
All liquid cooled models.
Spring compressor clamp
(P/N 529 035 724)
APPLICATION
1004 and 1503 engines.
mmr2004-Rev 7

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models