Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
Piston circlip installer
(P/N 529 035 765)
APPLICATION
1004 and 1503 engines.
Piston circlip installer
a. 18 mm (P/N 529 035 561)
b. 20 mm (P/N 529 035 562)
APPLICATION
a) All engines except 593, 693
and 793.
b) 2001 and older 593 and 693
engines.
Piston pin/connecting rod bear-
ing centering tool
(P/N 529 009 100)
NOTE: New diameter is 9.65
mm (.380 in).
APPLICATION
All engines except cageless en-
gines.
Pusher (55/59 mm)
(P/N 529 035 913)
APPLICATION
1004 engines.
Pusher (38/42 mm)
(P/N 529 035 914)
APPLICATION
1004 engines.
Support sleeve
(P/N 529 035 944)
APPLICATION
1004 engines.
N–>
Water pump ceramic seal
installer
(P/N 529 035 766)
APPLICATION
1004 engines.
N–>
Water pump oil seal installer
(P/N 529 035 757)
APPLICATION
1004 engines.
PTO cover oil seal installer
(P/N 529 035 910)
APPLICATION
1004 engines.
6 mmr2004-Rev

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models