Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
Countershaft bearing remover
(P/N 529 035 812)
APPLICATION
Skandic LT.
Countershaft bearing installer
(P/N 529 035 815)
APPLICATION
Skandic LT.
Spring scale hook (long)
(P/N 529 006 500)
APPLICATION
Tundra.
Transmission adjuster
(P/N 529 030 300)
APPLICATION
Vehicles equipped with “push-
pull shifter” reverse transmis-
sion.
Drive belt tension adjuster tool
(P/N 529 008 700)
Parts included:
1) Hexagonal wrench (P/N 420
876 730)
2) Socket wrench (P/N 529 015
000)
2
1
APPLICATION
All vehicles except Tundra and
Skandic WT.
Alignment bar
a. (P/N 529 035 808)
b. (P/N 529 035 586)
c. (P/N 529 035 594)
d. (P/N 529 026 900)
e. (P/N 529 026 700)
N–>
f. (P/N 529 035 974)
APPLICATION
a. Skandic LT.
b. ZX series with BOM-
BARDIER Lite and RER.
c. Elite model.
NOTE: The alignment bar
(P/N 529 035 594) must be
modified to fit on Elite. Re-
fer to PULLEY DISTANCE AND
ALIGNMENT.
d. Tundra
e. ZX series with TRA.
f. 2004 Skandic WT/SWT/SUV
550.
Burnishing bar
(P/N 529 026 402)
APPLICATION
Tundra and Skandic.
mmr2004-Rev 13

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models