Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
Bushing extractor/installer
(P/N 529 031 300)
APPLICATION
TRA drive pulley spring cover
with replaceable bushing.
Large bushing extractor
(P/N 529 031 100)
APPLICATION
Formula type driven pulley.
NOTE: Use this tool only with
former puller (P/N 529 018 600)
that has regular threads.
Large bushing extractor
(P/N 529 035 576)
APPLICATION
Formula type driven pulley.
NOTE: Use this tool only with
new puller (P/N 529 035 524)
that has Acme threads and sup-
port plate included with extrac-
tor (P/N 529 031 100).
Large bushing extractor
(P/N 529 035 575)
APPLICATION
LPV27drivenpulley.
NOTE: Use this tool only with
new puller (P/N 529 035 524)
that has Acme threads and sup-
port plate included with extrac-
tor (P/N 529 031 100).
N–>
Sliding half bushing
remover/installer
(P/N 529 035 931)
APPLICATION
TRA III and TRA IV.
Large bushing installer and small
bushing extractor
a. (P/N 529 031 200)
b. (P/N 529 035 931)
APPLICATION
a. All models except Tundra,
Skandic WT/SWT.
b. TRA III drive pulley spring
cover.
Chaincase seal pusher
(P/N 529 035 584)
APPLICATION
ZX series.
14 mmr2004-Rev

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models