Section 03 TROUBLESHOOTING
Subsection 04 (ELECTRICAL SYSTEM)
SYMPTOM ELECTRIC STARTER SOMETIMES DOES NOT WORK WHEN ACTIVATED.
CONDITION NORMAL USE
1. Check battery cables and starter wires.
a. Corroded and/or loose connection(s).
Clean and/or retighten.
2. Check fuse.
a. Oxidized or burnt fuse.
Clean or replace.
3. Check wiring harness connections.
a. Oxidized connections.
Clean or replace defective terminals.
4. Check START/RER switch.
a. Defective contacts in START/RER switch.
Replace.
b. Moisture in START/RER switch.
Blow dry START/RER switch.
TEST/INSPECTION
5. Check solenoid of electric starter.
a. Shorted solenoid wiring harness or corroded contact washer.
Replace.
64 mmr2004-Rev