Snap-On Zeus - Page 181

Data Manager Scanner DataViewer
174
12.6.5 Customizing the Parameter List
The parameter configuration tabs allow you to choose between displaying all
available parameters (Complete List), or only those from a (Custom List)
(Figure 12-17).
z To customize the parameter list:
1. Select the Custom List tab (Figure 12-17).
2. Select Edit List in the custom window.
1. Edit List
2. Custom List tab
Figure 12-17
A list of available parameters displays (Figure 12-18).
3. Select the parameters to include in your custom list. Select All and Deselect All
controls are also available to assist in the selection process.
Figure 12-18 Creating a custom parameter list
4. Select Save & Exit to close the window.
Only the parameters selected in your custom list are displayed.
2
1