Scanner Data (Viewing PIDs)
67
Figure 5-53 Sweep values (shown OFF)
Data Controls Toolbar
Whenever communication is established with a vehicle, the Scanner continuously
collects data transmitted by the ECM in the data buffer. The Data Toolbar
(Figure 5-54) contains the controls for navigating the buffered data and other
options.
Figure 5-54
Icon Description
Not Armed (Trigger Arm
Control)
(Flashing Icon) When this icon is flashing, the triggers are not
armed and no data capture will occur. (Select this icon to arm)
Armed (Trigger Arm
Control)
When this icon is continuously displayed, triggers are armed,
and ready to capture data. (Select this icon to disarm)
Go To Start/End
Moves to the first/last frame in the data buffer.
Pause
Suspends data collection.
Start (Capture)
Starts or resumes data collection.
Clear
Erases the data buffer.
Step Back/Forward
Moves to the previous/next frame in the data buffer.
Frame Counter
Indicates the data buffer frame currently displayed.
To Next Page
Loading...
Need help?
General
