Spectracom NetClock 9489 - Page 146

!
interface lo
*****************************************************
Example ospfd.conf file:
*****************************************************!
router ospf
ospf router-id 10.2.100.157
network 10.2.0.0/16 area 0.0.0.0
redistribute connected
distribute-list default out connected
!
access-list default permit 10.10.14.1/32
access-list default deny any
*****************************************************
Example ospf6d.conf file:
*****************************************************
!
interface eth0
!
router ospf6
router-id 10.2.100.157
interface eth0 area 0.0.0.0
redistribute connected
!
*****************************************************
Example bgpd.conf file:
*****************************************************!
router bgp 12
bgp router-id 172.17.1.12
network 172.17.0.0/16
neighbor 172.17.1.1 remote-as 3
!
redistribute connected
*****************************************************
130
CHAPTER 2 • NetClock User Reference Guide Rev. 16
2.15 Configuring NTP