graph, and the status information for the selected time.
3.3.3.2 Determining Your GNSS Receiver Model
To determine which GNSS receiver model is installed in a NetClock unit:
Note: If a NetClock unit is used exclusively as a Stratum2 server, it may not be
equipped with a GNSS receiver at all.
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the System Configuration panel, locate the line item GNSS Receiver:
GNSS Receiver Models
Spectracom strives to equip NetClock with current technology. Depending on the production
date of your NetClock unit, one of the following GNSS receiver models will be installed in
your unit (if any):
u-blox
®
M8T
3.3 Managing Input References
CHAPTER 3 • NetClock User Reference Guide Rev. 16
187
To Next Page
Loading...
