EasyManua.ls Logo

Spectracom NetClock 9489 - Spectracom Format 4

Default Icon
467 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sync Status Day 271 of year 2015.
Date April 15, 2015.
Time 12:45:36 EDT (Eastern Daylight Time). The time difference is 5 hours behind UTC.
Leap Second No leap second is scheduled for this month.
5.4.9 Spectracom Format 4
Format 4 provides a format indicator, time synchronization status character, modified Julian
date, time reflecting UTC with 0.1 millisecond resolution and a leap second indicator. Format 4
data structure is shown below:
E x a m p l e :
FFFFIMJDXX^HHMMSS.SSSS^L CR LF
Where:
FFFF Format Identifier (0004)
I Time Sync Status (Space, ?, *)
MJDXX Modified Julian Date
^ Space separator
HH Hours (00-23 UTC time)
MM Minutes (00-59)
SS.SSSS Seconds (00.0000-60.0000)
L Leap Second Indicator (space, L)
CR Carriage Return
LF Line Feed
The start bit of the first character marks the on-time point of the data stream.
The time synchronization status character (I) is defined as described below:
? When the receiver is unable to track any satellites and the time synchronization lamp is red.
* When the receiver time is derived from the battery backed clock or set manually through the Setup Port
Interface.
The leap second indicator (L) is defined as:
398 NetClock User Reference Guide
APPENDIX

Table of Contents

Related product manuals