The Clean Upgrade function wipes the CF card clean and recreates every system file. An
upgrade alone does not.
Note: When selecting both the Perform Upgrade checkbox, and the Clean
Upgrade checkbox, Force Upgrade will also be automatically selected, as neces
sary for this process.
4.7.5.4 Further Reading
For more information on sanitization, see:
"Deleting the GNSS Receiver Position" on page197.
Certificate of Volatility for NetClock: Certificate of Volatility, NetClock
Additional information regarding Sanitization and Volatility may be found in the Spec
tracom knowledge base support.spectracom.com
Contact Spectracom Technical Support (see "Technical Support" on page429).
322
CHAPTER 4 • NetClock User Reference Guide Rev. 16
4.7 Resetting the Unit to Factory Configuration
To Next Page
Loading...
