2.
Navigate to the INTERFACES > OPTION CARDS drop-down menu, and click the list
entry of the option module identified above. The option module’s Status Summary panel
opens:
All the inputs and/or outputs of this option module are listed in the Status Summary panel.
In accordance with the Signature Control setting, and the Lock Status, the current signal state for
an output is indicated as:
ENABLED (green); or
DISABLED (orange)
The current state of an input signal is indicated as:
VALID (in green); or
INVALID (in red)
The Status Summary panel will be refreshed automatically every 30seconds. Click the Refresh
button (circling arrows) on the right to refresh the status instantaneously. A slight refreshment
delay is normal (the duration depends on the configuration of your system.)
5.2.3.5 Verifying the Validity of an Input Signal
The HOME page of the NetClock WebUI provides quick access to the status of all inputs via its
Reference Status panel.
NetClock User Reference Guide 347
APPENDIX
To Next Page
Loading...
