ST STM32F101 series Reference Manual

Overview of the manual RM0008
43/1128 DocID13902 Rev 15
Legend for Table 2:
•
The section in this row must be read when using the peripherals in columns
marked with “
•"

The section in this row can optionally be read when using the peripherals in
columns marked with
“"
Table 2. Sections related to each peripheral
Backup registers (BKP)
General-purpose I/Os (GPIOs)
Analog-to-digital converter (ADC)
Digital-to-analog converter (DAC)
Advanced-control timers (TIM1&TIM8)
General-purpose timers (TIM2 to TIM5)
General-purpose timers (TIM9 to TIM14)
Basic timers (TIM6&TIM7)
Real-time clock (RTC)
Independent watchdog (IWDG)
Window watchdog (WWDG)
Flexible static memory controller (FSMC)
Secure digital input/output interface (SDIO)
USB full-speed device (USB)
Controller area network (bxCAN)
Serial peripheral interface (SPI)
Inter-integrated circuit (I2C) interface
USART
USB on-the-go full-speed (OTG_FS)
Ethernet (ETH)
Section 2:
Documentation
conventions
••••••••• •••••••••••
Section 3: Memory and
bus architecture
••••••••• •••••••••••
Section 4: CRC
calculation unit
Section 5: Power
control (PWR)
•••••••••••••••••••·
Section 6: Backup
registers (BKP)
• 
Section 7: Low-,
medium-, high- and XL-
density reset and clock
control (RCC)
••••••••• •••••••••••
Section 8: Connectivity
line devices: reset and
clock control (RCC)
••••••••• •••••••••••

ST STM32F101 series Specifications

General

Brand	ST
Model	STM32F101 series
Category	Computer Hardware
Language	English