DocID13902 Rev 15 44/1128
RM0008 Overview of the manual
46
Section 9: General-
purpose and alternate-
function I/Os (GPIOs
and AFIOs)
•••••• à •••••••••••
Section 10: Interrupts
and events
Section 13: Direct
memory access
controller (DMA)
Section 11: Analog-to-
digital converter (ADC)
·
Section 12: Digital-to-
analog converter (DAC)
·
Section 14: Advanced-
control timers
(TIM1&TIM8)
·
Section 15: General-
purpose timers (TIM2 to
TIM5)
à
·
Section 16: General-
purpose timers (TIM9 to
TIM14)
·
Section 17: Basic
timers (TIM6&TIM7)
·
Section 18: Real-time
clock (RTC)
··
Table 2. Sections related to each peripheral (continued)
Backup registers (BKP)
General-purpose I/Os (GPIOs)
Analog-to-digital converter (ADC)
Digital-to-analog converter (DAC)
Advanced-control timers (TIM1&TIM8)
General-purpose timers (TIM2 to TIM5)
General-purpose timers (TIM9 to TIM14)
Basic timers (TIM6&TIM7)
Real-time clock (RTC)
Independent watchdog (IWDG)
Window watchdog (WWDG)
Flexible static memory controller (FSMC)
Secure digital input/output interface (SDIO)
USB full-speed device (USB)
Controller area network (bxCAN)
Serial peripheral interface (SPI)
Inter-integrated circuit (I2C) interface
USART
USB on-the-go full-speed (OTG_FS)
Ethernet (ETH)
To Next Page
Loading...
Need help?
General
