Overview of the manual RM0008
45/1128 DocID13902 Rev 15
Section 19:
Independent watchdog
(IWDG)
·
Section 20: Window
watchdog (WWDG)
·
Section 21: Flexible
static memory controller
(FSMC)
·
Section 1: Secure
digital input/output
interface (SDIO)
·
Section 23: Universal
serial bus full-speed
device interface (USB)
·
Section 24: Controller
area network (bxCAN)
·
Section 25: Serial
peripheral interface
(SPI)
·
Section 26: Inter-
integrated circuit (I2C)
interface
·
Section 27: Universal
synchronous
asynchronous receiver
transmitter (USART)
·
Table 2. Sections related to each peripheral (continued)
Backup registers (BKP)
General-purpose I/Os (GPIOs)
Analog-to-digital converter (ADC)
Digital-to-analog converter (DAC)
Advanced-control timers (TIM1&TIM8)
General-purpose timers (TIM2 to TIM5)
General-purpose timers (TIM9 to TIM14)
Basic timers (TIM6&TIM7)
Real-time clock (RTC)
Independent watchdog (IWDG)
Window watchdog (WWDG)
Flexible static memory controller (FSMC)
Secure digital input/output interface (SDIO)
USB full-speed device (USB)
Controller area network (bxCAN)
Serial peripheral interface (SPI)
Inter-integrated circuit (I2C) interface
USART
USB on-the-go full-speed (OTG_FS)
Ethernet (ETH)