Studer Vista 1 - Direct, Multi-Track and N-1 Output Parameters

Vista 1 Digital Mixing System
3-10 Parameters
Document generated: 18.04.17
SW V5.3
3.3.3 Direct, Multi-Track and N–1 Output Parameters
Press GLOBAL VIEW: OUT n-1.
This view allows controlling the level of the Direct, Multi-Track and the
channel’s contribution (‘send’) to the N–1 bus(es). If the channel is assigned
as a bus owner of an N–1 bus, the N–1 bus outputs is controlled from here as
well.
From surround input channels, N–1 mono busses are fed with an ITU-com-
patible mono down-mix of the surround signal. N–1 stereo busses are fed
accordingly with an ITU-compatible stereo down-mix.
DIR OUT On/Off Direct output on/off.
DIR OUT Rotary Direct output level, MUTE (i.e. –∞ dB) to +10 dB.
Mtrk Multi-track output level, MUTE (i.e. –∞ dB) to +10 dB.
Pan On/Off Allows panning of the channel’s output signal to the multi-track bus if set to
‘Pan On’, in addition to the standard channel pan. The panning is adjusted
with the usual Pan controls.
n–1 OUT On/Off N–1 Output on/off.
n–1 OUT Rotary N–1 Output level, MUTE (i.e. –∞ dB) to +10 dB.
n–1 SEND Rotary Send level (‘contribution’) of this channel to all assigned N–1 busses (default:
0 dB).