EasyManua.ls Logo

Studer Vista 1 - Technical Specifications (Subject to Change Without Prior Notice)

Studer Vista 1
401 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vista 1 Digital Mixing System
2-4 Desk Operation
Document generated: 18.04.17
SW V5.3
2.1.3 Technical Specifications (subject to change without prior notice)
Mic / Line Input Module
Conditions / Details Value
General Conditions: Gain Setting 15 dBu
0 dB
FS
unless otherwise noted.
Input Impedance
(Electronically Balanced)
3.6 kW
Gain
for 0 dB
FS
(adjustable in steps of 1 dB) –11 to +75 dB
Maximum Input Level
–11 dB Gain, R
source
= 600 W
+26 dBu
0 dB Gain, R
source
= 150 W
+15 dBu
Frequency Response
20 Hz to 20 kHz, 40 dB Gain +0 / –0.9 dB
30 Hz to 20 kHz, 40 dB Gain +0 / –0.6 dB
THD + Noise
1 kHz, –1 dB
FS
≤ –87 dB
1 kHz, –9 dB
FS
(Nominal Level) ≤ –94 dB
20 Hz to 20 kHz, –30 dB
FS
< –102 dB
FS
Equivalent Input Noise / Noise Figure (NF)
R
i
= 200 W, Gain ≥ 60 dB
–127.6 dBu / NF ≤ 2
Crosstalk
1 kHz ≤ –100 dB
Input Delay
12 samples
250 μs @ 48 kHz
Common Mode Rejection Ratio (CMRR)
30 Hz to 20 kHz, All Gain Settings > 46 dB
1 kHz, –11 dB to +26 dB Gain 60 dB typ.
Line Output Module Conditions / Details Value
Output Impedance
(Electronically Balanced) 50 Ω
Frequency Response
20 Hz to 20 kHz +0 dB / –0.3 dB
THD + Noise
–1 dB
FS
, 1 kHz –90 dB
–30 dB
FS
, 20 Hz to 20 kHz –103 dB
Crosstalk
1 kHz –115 dB
Output Level
R
L
600 W; Globally adjustable with hardware switches
(steps: +24, +22, +20, +18, +15, +12, +9, +6 dBu)
+6 to +24 dBm
for 0 dB
FS
Output Delay
10.4 samples
217 μs @ 48 kHz
AES / EBU Input / Output Module Conditions / Details Value
Input/Output Impedance
110 W
Input Sensitivity
min. 0.2 V
RMS
Ouptut Level
into 110 W
4.0 V
RMS
THD + Noise
max. –115 dB
SRC Range
22-108 kHz
Input Delay
r
S_IN
< r
S_OUT
: D =
48
r
S_IN
[s]
r
S_IN
> r
S_OUT
: D =
16
r
S_IN
+ [s]
32
r
S_OUT
Power Supply Conditions / Details Value
Primary Input Voltage Range
Auto-ranging, with power factor correction (PFC); EN/UL
approved. 2 power inlets provided for redundancy.
100 to 240 V AC ± 10%
50 to 60 Hz
Power Consumption Vista 1
22-Fader Version 220 W typ., 300 W peak
Power Consumption Vista 1
32-Fader Version 190 W typ., 250 W peak
Ambient Conditions Details Value
Operating Temperature Range*
0 to 45 °C
32 to 113 °F
Relative Humidity*
non-condensing
95%
* Also refer to ‘Appendix 1: Air Temperature and Humidity’ on page X at the beginning of this manual
Weights Value
Vista 1 Console, 22-Fader Version
54 kg
Vista 1 Console, 32-Fader Version
60 kg

Table of Contents

Other manuals for Studer Vista 1

Related product manuals