Vista 1 Digital Mixing System
1-18 Vista 1 FX
Document generated: 18.04.17
SW V5.3
Shift 1 & 2 : Determines the amount of pitch Shift or detune Shift from the original signal
source. Works best with individual notes.
Delay 1 & 2 : Sets the Delay time before the pitch shift or detune effect is heard in the Pitch
Shift and Detune effects.
Feedback 1 & 2 : Adjusts how much of the shifted signal is sent back through the delay line in
Pitch Shift and Detune for creating cascading arpeggio type effects.
Pan 1 & 2 : Sets the Pan position in the stereo field for each shifted signal.
9.3.6.4 Dynamics
For the category
Dynamics
the following parameters are available.
Frequency : Selects the Frequency range of compression from 1600Hz to 10kHz (the
most common frequencies in which excessive sibilance occurs).
Bandwith : Controls the Bandwidth or “Quality” (Q) of frequency range. The higher the
selected value, the tighter the Bandwidth, and less apparent the de-essing
effect is.
Ratio : Determines the amount of compression, from 1:1 (no effect) to Infinity:1
(complete limiting).
To Next Page
Loading...
