Vista 1 Digital Mixing System
2-46 Desk Operation
Document generated: 18.04.17
SW V5.3
2.2.5.17 Contribution Access
Very often it is useful to operate the console in ‘reverse’ way, coming from
an output fader and operate the various input channels contributing to this
output. By pressing one of the CONTRIB keys located above the faders the
Vistonics rotaries will show all channel faders currently contributing to this
master signal. In case of a matrix or AUX master output, the view shows all
channels contributing to this output, hence input, subgroup or master chan-
nels.
‘Contribution’ can be operated in two ways, depending on the state of the
REDUCED (View) ON key on the left-hand side:
REDUCED (View) ON When pressing CONTRIB only the channels currently assigned to the corre-
sponding master bus are displayed.
To Next Page
Loading...
