Vista 1 Digital Mixing System
3-32 Parameters
Document generated: 18.04.17
SW V5.3
SC HI CUT/LO CUT Rotary Both side-chain high- and low-cut filters feature cut-off frequencies continu-
ously adjustable between 20 Hz and 20 kHz.
MKUP GAIN auto on/off ‘auto on’ automatically compensates a compressor level loss. ‘auto off’ acti-
vates the manual MKUP GAIN rotary control.
MKUP GAIN Rotary To manually compensate a level loss caused by the dynamics processing,
adjustable in 1 dB steps from 0 through +24 dB.
LOOKFWD On/Off The Look-Forward Delay function allows inserting an audio delay after the
dynamics level detector in order to work with higher attack times without
any overshooting of levels.
LOOKFWD Rotary The Look-Forward Delay can be set in 11 steps within a range from 0 to
25 ms (0 ms, 0.2 ms, 0.3 ms, 0.5 ms, 1 ms, 2 ms, 3 ms, 5 ms, 10 ms, 20 ms,
and 25 ms).
By activating the look-forward feature, a real delay is inserted into the audio
path. In order to avoid artifacts with other console channels, it is recom-
mended to insert a corresponding delay into the other channels as well.
Note The COMP/LIMIT and EXP/GATE hardware keys in the CHANNEL PROCESSING
area can be used for activating/deactivating the compressor and limiter, and
the expander and gate parts of the dynamics section of a channel (or a gang
of channels) selected with LINK/SEL, in addition to the individual on/off keys
for each dynamics function.
To Next Page
Loading...
