Vista 1 Digital Mixing System
Parameters 3-47
Document generated: 18.04.17
SW V5.3
CENTER On/Off On/off selector for center channel use.
CENTER Center channel percentage control; 0% = no center channel use (phantom
center), 100% = center channel fully active.
FRONT WIDTH On/Off Switches the FRONT WIDTH function on/off.
FRONT WIDTH The FRONT WIDTH parameter is used to control the width of the front signal.
It is only functional if there is a difference between the left and right input
channels. FRONT WIDTH operates over a range from 0% (mono) to 200%
(‘super stereo’).
F/R DEPTH On/Off Switches the F/R DEPTH function on/off.
F/R DEPTH The F/R DEPTH parameter is used to control the depth of the surround space.
It is only functional if there is a difference between the front and the rear input
channels. F/R DEPTH operates over a range from 0% (zero depth) to 200%
(‘super depth’).
REAR WIDTH On/Off Switches the REAR WIDTH function on/off.
REAR WIDTH The REAR WIDTH parameter is used to control the width of the rear signal.
It is only functional if there is a difference between the left and right input
channels. REAR WIDTH operates over a range from 0% (mono) to 200%
(‘super stereo’).
To Next Page
Loading...
