Vista 1 Digital Mixing System
RELINK 8-7
Document generated: 18.04.17
SW V5.3
There is an additional MIC CTRL parameter in the Vistonics view that allows
setting the mic access control to Free, so that the mic can be controlled by
other systems directly.
A description of how the different states look like is given below.
1a First, no microphone is connected to the channel. Then, a shared mic currently
in use by another OnAir or Vista console is manually patched to the input
channel:
1b First, no microphone is connected to the channel. Then, a shared mic currently
not in use by another OnAir or Vista console is manually patched to the input
channel:
To Next Page
Loading...
