1D-21 Engine Mechanical:
34) Loosen the chain adjuster bolts (36) to provide
additional chain slack, left and right.
35) Remove the washer (37) and engine sprocket (38).
36) Remove the clutch release arm (39) by removing the
clutch release arm bolt (40). Refer to “Clutch Cable
Removal and Installation in Section 5C (Page 5C-
2)”.
37) Remove the return spring (41) and washer (42).
38) Disconnect the clutch cable (43).
39) Disconnect the reservoir tank over flow hose (44).
40) Support the engine with a proper jack (45).
CAUTION
!
Do not support at the oil filter (46).
41) Remove the engine mounting nuts (47), (48) and
(49).
35
36
36
I944H1140307-02
37
38
I944H1140308-02
39
40
41
42
I944H1140309-03
43
I944H1140310-02
44
I944H1140311-02
46
45
I944H1140312-02
47
I944H1140313-03
48
49
I944H1140314-03