Suzuki SFV650 - Page 230

1D-41 Engine Mechanical:
• Be sure to check and adjust the valve clearance.
Refer to “Valve Clearance Inspection and Adjustment
in Section 0B (Page 0B-4)”.
• Apply engine oil to the new O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
• Tighten the generator cover plug (10) and valve timing
inspection plug (11) to the specified torque.
CAUTION
!
Use the new gasket washer to prevent oil
leakage.
Tightening torque
Generator cover plug (c): 11 N·m (1.1 kgf-m, 8.0
lbf-ft)
Valve timing inspection plug (d): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
Cylinder Head Cover
• Pour engine oil in each oil pocket in the cylinder
heads.
• Install a new gaskets to the cylinder head covers.
CAUTION
!
Use new gaskets to prevent oil leakage.
• Apply bond to the cam end caps of the gaskets as
shown in the figure.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
I944H1140203-02
10
(d)
11
(c)
10
I944H1140336-02
I944H1140204-01
I944H1140205-01