Suzuki SFV650 - Page 383

Front Suspension: 2B-6
• Apply fork oil to the outer slide metal and oil seal lip.
: Fork Oil 99000–99001–SS8 (SUZUKI FORK
OIL SS-08 or equivalent)
• Install the oil lock piece (4) into the inner tube.
• Install the inner tube into the outer tube with care not
to drop the oil lock piece out.
NOTE
After installing the inner tube into the outer
tube, keep the oil lock piece into the inner
tube by compressing the front fork fully.
• Install the oil seal (3) into the outer tube using the
special tool.
Special tool
(A): 09940–52861 (Front fork oil seal
installer)
• Install the oil seal stopper ring (5).
CAUTION
!
Make sure that the oil seal stopper ring is
fitted securely.
• Install the dust seal (6).
Cylinder bolt
• Install the ring (1) to the cylinder.
• Install the rebound spring (2) to the cylinder (3).
• Apply fork oil to the cylinder ring.
: Fork Oil 99000–99001–SS8 (SUZUKI FORK
OIL SS-08 or equivalent)
• Insert the cylinder (3) into the inner tube.
1
2
3
I944H1220015-01
4
I944H1220016-01
(A)
3
I717H1220024-01
5
6
I944H1220017-01
1
I944H1220018-01
2
3
I944H1220019-01