2B-7 Front Suspension:
• Apply thread lock to the cylinder bolt (4) and tighten it
to the specified torque with a 6-mm hexagon wrench
and special tools.
CAUTION
!
Use a new cylinder bolt gasket (5) to prevent
oil leakage.
NOTE
Check the front fork for smoothness by
stroking it after installing the cylinder.
Special tool
(A): 09940–34520 (T handle)
(B): 09940–34531 (Attachment A)
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Front fork cylinder bolt (a): 20 N·m (2.0 kgf-m,
14.5 lbf-ft)
Fork oil
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the
inner tube.
: Fork Oil 99000–99001–SS8 (SUZUKI FORK
OIL SS-08 or equivalent)
Capacity (Each leg)
517 ml (17.5/18.2 US/lmp oz)
• Move the inner tube up and down several strokes until
bubbles do not come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE
Take extreme attention to pump out air
completely.
5
(a)
4
I944H1220020-02
(A)
(B)
I944H1220021-01
I649G1220026-02
I717H1220029-01
To Next Page
Loading...
