Front Suspension: 2B-8
• Hold the front fork vertically and adjust fork oil level
with the special tool.
NOTE
When adjusting the fork oil level, remove the
fork spring and compress the inner tube fully.
Special tool
(A): 09943–74111 (Fork oil level gauge)
Fork oil level “a”
96 mm (3.78 in)
Fork spring
• Install the fork spring as shown.
NOTE
The smaller diameter “a” should face to the
bottom side of the front fork.
• Install the washer (1) and spacer (2).
Front fork cap bolt
• Apply fork oil lightly to the O-ring (1).
CAUTION
!
Use a new O-ring (1) to prevent oil leakage.
: Fork Oil 99000–99044–10G (SUZUKI FORK
OIL G-10 or equivalent)
• Install the front fork cap bolt to the inner tube
temporarily.
• Install the front fork protector (2).
NOTE
Fit the projection “A” of the front fork
protector to the depression “B” of the front
fork outer tube.
(A)
“a”
I705H1220021-01
“a”
I944H1220022-01
1
2
I944H1220023-01
1
I944H1220024-02
2
“A”
“B”
I944H1220025-02
To Next Page
Loading...
