Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 100 of 545 2020-04-15
3.1.4.7. AT&K - Flow Control
Flow Control settings.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT&K[<n>]
Set command controls the serial port flow control behavior.
Parameter:
Name
Type
Default
Description
<n>
integer
3
flow control behavior
Values:
0
:
no flow control
3
:
hardware bi-directional flow control (both RTS/CTS active)
If parameter is omitted, the command has the same behavior as AT&K0
&K has no Read Command. To verify the current setting of &K, simply check the settings
of the active profile issuing AT&V.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English